Fluted Bowl: Greg Crowe

Throw a tall cylinder and leave the walls approx 15 mm thick.
Using a wire cut down the side of the cylinder with a see saw motion.
With clean dry hands, apply pressure on the inside of the cylinder to form the bowl.
Continue till desired twist is achieved.
Turn the foot as you would normally but keeping in mind the fragile rim of the bowl.

Images by J. Kovesi Watt

Wire cutting
With a see saw motion cut done the side of the cylinder
Pressure on the inside to push out the bowl
Check and compact the rim
Push out to desired size
Finished work. Wood/Salt Fired

© 2018 All Rights Reserved
Ceramic Arts Association of Western Australia Inc.
Web hosting proudly donated by DogHouse Media

Enter your e-mail address.
Enter the password that accompanies your e-mail.